It will be an incredibly glamorous idea to have a pool in your backyard. It is easy to dream of hosting parties and working out after work. Or spending hours lounging by the pool while obtaining the perfect tan. But, the most important aspect of pool ownership is often overlooked: maintenance. Your pool can become unattractive if it is not maintained properly. There are 10 things you can do to keep your pool in tip-top shape. These tips will help you start the summer season, whether you are a new owner or a long-time pool keeper.

  1. You can make scrubbing and skimming a part of your life.

It is easy to clean the pool’s surface with leaves and other debris. But it is worth repeating. Skimming the pool should be done every day to maintain a clean environment. The Polaris Pool 360 is middle-of-the-road in price and consistently gets five-star reviews. You don’t have to scrub the pool as often, but it doesn’t necessarily need to be done every week. It’s possible to scrub your siding once a week. To keep your siding looking great, look for growths and use a scrub brush. You can reuse an old sock. You can fill it with chlorine and leave it on the spot for a while before cleaning again. You’ll be able to use the socks you don’t have anymore because the chlorine will kill any algae. It’s a win/win situation.

  1. Consider the filter as your pool’s kidneys.

Your kidneys constantly work to remove impurities, so your pool filter can be turned off, removed the cap from the deck and lifted out the filter basket. It would be best if you cleaned your filter basket at the very least once per week. Once a month, you will need to clean your filter system’s pipes. This can be done by backwashing. Set your filter to “backwash”, remove the leaf basket, and clean it. Please turn on the pump, then let it run until clear water is ejected from the waste pipe. This can cause damage to the filter’s mechanism. Your filter should be set on a timer so it can run at least six hours per day.

  1. Pools require consistent chemical levels.

One of the most crucial aspects of pool maintenance is chemical levels. Unbalanced water can make your pool look murky and irritate skin and eyes. It can also cause your pool to be a breeding ground of bacteria. The Center for Disease Control states that six levels of chemical analysis must be taken into consideration.

  • Cyanuric acid – Protects chlorine from the sun and determines the required level of Free Chlorine. The ideal reading for outdoor pools is 30- 50.
  • Free chlorine – This sanitizer keeps your pool water clean and free from germs.
  • Acidity/Alkalinity– Also called pH level, acidity should be between 7.5 to 7.8 to avoid irritation and prevent pool equipment from eroding.
  • Total Alkalinity Helps maintain PH in balance. The levels should be between 60 and 120.
  • Calcium Hardness – Appropriate levels help prevent plaster damage. For pools with vinyl siding, aim for 220-350.

It is simple to test the water. You can purchase a few test kits at your local pool shop. It should be filled with water from your pool. Close the vials and add the solution. The sample water will begin to change in color after a few seconds. Comparing the water and the colors on the test kit should help you determine the chemical levels. Adjust the levels as necessary to reach the ideal balance.

  1. Chemicals Costing Too Much? Give Baking Soda a Try

Pool chemicals can be costly to buy. However, most pool shops recommend sodium bicarbonate to reduce the pool’s Alkalinity without reducing the pH levels. To get the job done, they will sell you overpriced products. Regular baking soda is a cheaper alternative. Every baking soda box has “sodium bicarbonate” listed on the ingredients label. You don’t have to do complicated math calculations if you are worried about baking soda. Baking soda contains the same amount of sodium bicarbonate per kilogram as solutions. This means that the amount you would need to add to water would be the same.

  1. Do Not Be Afraid to Shock a Cloudy Pool

You don’t have to shock your pool with chemicals. This may sound like something only suitable for public pools. Think about the effect a large party has on your pool’s water quality. It’s likely to be murkier today than it was before the big party. What is the cause of this obscurity? Bacteria cause that opacity. This is done by diluting 3 to 5 times the amount of chlorine with water. Then, it’s filtered through the pool’s return line and then slowly refilling it with water.

  1. The water level must be monitored closely.

The water’s physical composition is as important as its chemical content. After a rainstorm or a day of cannonballs with the kids, water levels can fluctuate. You want to keep your skimmer at a half-open level. To add water to the skimmer, you can use a garden hose if the water level is too low. Rent a submersible pump at a local home improvement store to drain excess water. If your pool’s liners are made of vinyl or fiberglass, it is worth consulting a professional to ensure the correct water level. They will be off-balance due to fluctuations in the water level.

  1. To absorb oils, use a tennis ball.

People think of tennis balls in a pool when they think of playing catch. But those toys can serve double duty. When swimmers leave the pool, oils such as suntan lotion, hair products, and natural oils from our skin can be left behind. It’s not pleasant to think about it, but there is an easy way out. Throw a tennis ball into the water. The tennis ball’s fibers will absorb oils and prevent them from sticking to the water’s surface.

  1. Power Wash Your Pool Deck

Your pool’s surrounding area is as important as its physical structure. Power washing can be used to keep your pool deck looking great. Renting a power washer is possible at most home improvement stores:

  1. Clean the deck of all leaves and dirt. This will prevent you from spreading them throughout the cleaning process.
  2. Follow the instructions to assemble the power washer.
  3. Follow the instructions to assemble the power washer.

To prevent any gouging, the power washer should be placed several feet above the surface of your pool deck.

  1. Book a Yearly Service Appointment, Regardless of whether you think it is necessary.

Sometimes, you have to trust an expert. You may not be able to properly care for your pool’s mechanical equipment, such as filters, pumps, and heating systems. It would be best if you had a professional inspect your pool at least once per year. Make a list of any leaks in the piping or holes in the mechanism. Also, note any strange smells from the water. These issues can be mentioned to your service person to help you decide where to begin. Remember: It is possible to detect and fix small problems now rather than later.

  1. Find out how to properly winterize to prevent damage.

Pool care is important during summer, but it’s just as important to ensure that it’s winter-proofed. It’s not fun to take off a cover for the summer and find that it is leaking or dangerous bacteria in their pool. You can save a lot of money and time by properly winterizing your pool. You can then drain any water from your pipes and purchase a cover to protect the pool. These pool maintenance tips can be incorporated into your regular cleaning schedule to ensure you spend more time relaxing than doing chores. This is how it should be. Have a pool maintenance tip you would like to share? Leave a comment below.

 

Leave a Reply